HOLDEN WH II 2002 Series Owner's Handbook Manual page 65

Lap/sash belts
To fasten, pull the metal tongue across
your body and clip into the buckle. When
the metal tongue is locked safely into place
you will hear a "click". After fastening, settle
the belt at the hip, go across to the buckle,
then up under the sash. Any extra belt
length retracts automatically.
The lap section should be worn as low as
possible on your hips, not on your waist.
Make sure the belt is free from twists and
fits firmly.
The "emergency-locking retractor belt"
allows you to move while the car is travelling
normally but locks immediately on fast
braking, impact with a solid object or any
quick movement by the wearer.
To undo the belt, press the release button
on the buckle and allow the belt to retract.
Check that it fully retracts without twisting
or turning.
Shoulder height adjust
The seat belt is anchored to the car near
your shoulder. The position of anchorage
can be moved to different heights.
Squeeze the adjuster and move it up or
down as required. Ensure the anchor clicks
into position.
Short people should select a low anchor
position, tall people a higher one. This
ensures, for both safety and comfort, that
the webbing of the seat belt fits on the
shoulder.
For your safety, the driver's side shoulder
anchor should not be adjusted while the car
is in motion.
SEAT BELTS
Chapter
3
KNOW YOUR CAR
3-5
I