HOLDEN WH II 2002 Series Owner's Handbook Manual page 101

Chapter 6
6-6
EMERGENCIES
Remove the spare wheel, jack and
4.
combination jack handle/wheel wrench:
Undo the nut in the centre of the wheel
anti-clockwise and lift the wheel out of
the boot.
The tools are stored in a compartment
in the floor of the boot, on the left side:
pull back the carpet,
•
lift back the cover,
•
press in the clip,
•
pull the jack out.
•
The combination jack handle/wheel
wrench is stored under the jack. There
are no clips holding the wrench; it pulls
straight out.
5. Block the wheel diagonally opposite the
flat tyre with a solid object.
6. Remove the centre cap by inserting the handle end of the wheel wrench tool between
the wheel and the centre cap at the slots provided and gently lever off.
7. Loosen, but do not remove, wheel nuts by turning wheel wrench anti-clockwise.
FLAT TYRE cont.
Flat tyre
Chocks