HOLDEN WH II 2002 Series Owner's Handbook Manual page 41

FAN Press .A. or
increase or decrease the fan speed.
Five manual fan speeds are available. When
the fan has been adjusted manually the fan
blades will fill according to the fan speed.
When the AUTO button is pressed all
functions, including the fan speed, go into
auto mode. When the fan is operating
automatically, the graphics of the fan blades
are clear. Three sets of auto fan speeds are
available, for individual preferences. When
Auto is first selected, the fan will use the
middle set of fan speeds. Press the fan .A. or
T buttons to change to the faster or slower
set of fan speeds. Note the highlighted
blades in the fan graphic are briefly visible
when the button is pushed.
If the Manual position is selected the fan will
go out of auto mode and back to manual
mode.
When the engine is not running the fan
speed is limited to conserve the battery.
OFF Switches the system OFF and ON.
When OFF, the fan and air conditioning are
switched off but the system still tries to control the
cabin temperature and
AUTO
control (light in the switch glows green).
Manual override of any controls can impede the system maintaining
the set temperature. It is designed to operate with minimum manual
adjustment. The light in the switch goes out when not in full auto
mode.
Allow the system to stabilise before changing comfort settings.
CLIMATE CONTROL
T on the fan switch to
Pressing this button switches the system to full automatic
Chapter 1
DASH
cont.
1-31
I