Warping An Image - Christie H Series User Manual

Warping and blending

Hide thumbs Also See for H Series:

Table of Contents

c) To make the applied color invisible, select Transparency and set the value to 3.

Christie recommends enabling transparency to make the applied color invisible while

projecting a brighter image.

5. To apply the color setting on the selected area and send the black level settings to the

projector, select Overwrite.

Transparency and black level blending are automatically enabled.

6. Repeat steps 3 to 6 for each additional area that requires adjustment.

7. To clear the regions from the display, clear the Enable checkbox.

The regions are no longer visible, but are still part of the configuration.

Warping an image

Use warping to project images on any surface shape or correct image distortion.

1. In the Projector Control dialog, switch to the Warp tab.

2. To change the color of the grid cursor, depending on the projected image, select Color and

select the color.

3. If the project contains two or more projectors, select Enable to shutter the projectors.

4. To simultaneously change the projecting image, select Real time send result.

When enabled, the Send and Undo options are disabled.

5. Adjust the warping.

a) To increase or decrease the grid number, use the Grid Number slider.

You can also use Ctrl+ or Ctrl-.

Start with a minimal number of grids and gradually increase the number of grids. Christie

recommends starting with a 2x2 setup. Using fewer grids allows for less warping.

b) To select the cursor, select the cursor or select W, A, S, or D.

c) To increase or decrease the size of each adjustment step, use the Moving Pitch slider or

select plus sign (+) or minus sign (-).

d) To move the cursor, use the arrow keys.

Start adjusting the outer cursors first, and then the inner cursors.

Adjusting the outer cursors after adjusting inner cursors removes the inner cursor

settings.

H Series, HS Series, GS Series and Inspire Series User Guide–Warping and Blending

020-000807-03 Rev. 1 (01-2024)

If printed, please recycle this document after use.

Warping and blending

Table of Contents