Table of Contents
Advertisement
1.3.4.2
Bio-degradable hydraulic oil
1.3.5 Gear oil ISO VG 220
1.3.6 Lubrication grease
When refilling or changing oil, use only hydraulic oil type HVLP
according to DIN 51524, part 3, or hydraulic oil type HV according
to ISO 6743/4.
The viscosity index must be at least 150 (observe information of
manufacturer).
The hydraulic system can also be operated with a synthetic ester
based biodegradable hydraulic oil.
The biologically quickly degradable hydraulic oil Panolin HLP
Synth.46 meets all demands of a mineral oil based hydraulic oil
according to DIN 51524.
In hydraulic systems filled with Panolin HLP Synth.46 always use
the same oil to top up.
When changing from mineral oil based hydraulic oil to an ester
based biologically degradable hydraulic oil, you should consult the
lubrication oil service of the oil manufacturer, or our customer
service for details.
NOTICE!
Danger of damage to the hydraulic system!
–
After the changeover check the hydraulic oil fil-
ters increasingly for contamination.
–
Have regular oil analyses performed regarding
the water content and mineral oil.
–
Replace the hydraulic oil filter at the latest after
500 operating hours.
Use only a synthetic gear oil type CLP HC acc. to DIN 51 502; DIN
51 517-3; ISO-L-CKC / CKD / CKE acc. to ISO 6743-6 and ISO
12925-1 with viscosity class SAE 220.
Kinematic viscosity of 220 mm
at 100 °C (212 °F). The viscosity index (VI) should be at least 145
(observe information of manufacturer).
For lubrication purposes use an EP-high pressure grease, lithium
saponified (penetration 2), acc. to DIN 51502 KP 2G.
BF 700 C-2
General – Fuels and lubricants
2
/s at 40 °C (104 °F) and 25 mm
2
/s
21
Advertisement
Table of Contents
