Generate>Auto; Generate>Manual; Figure 4-6. Generate>Auto Page; Figure 4-7. Generate>Manual Page - Teledyne T750 User Manual

G
ENERATE
This is the simplest procedure for generating calibration gas mixtures: select the component
gas, the target concentration, the units, and the total flow to be output by the calibrator. The
calibrator automatically calculates and sets the individual flow rates for the Diluent and
selected gas to create the desired calibration mixture. Total Flow is defined by the user
depending on system requirements. See Section 2.5.5 for more information.
G
ENERATE
This mode provides complete the user with more complete control of the gas mixture
process, which requires the user set the both the component gas flow rate and diluent
airflow rate. This allows control of the mixing ratio and total calibration gas flow rate.
In addition, if the T750 calibrator is equipped with the optional O
be included in the calibration mixture (e.g. using the GPT functions), the user also needs
to set the ozone generator mode and set point.
083730750B DCN8606
>AUTO
Figure 4-6. Generate>AUTO Page
>MANUAL
Figure 4-7. Generate>MANUAL Page
generator, and O is to
3 3
87