Table of Contents
Advertisement
Alerts Log
The Alerts Log holds a history of alerts that were triggered by factory-defined and user-
defined Events, such as warnings and alarms.
USB Utilities (Downloads and Updates)
The USB Utility page serves multiple purposes using a flash drive connected to the
instrument's front panel USB port:
The Status field shows when an inserted flash drive has been detected, at which time
firmware updates, configuration copying and DAS downloading can be carried out.
D
OWNLOADING
DAS data (collected by the Datalogger, Section 3.3.1) can be downloaded from the
instrument to a flash drive through the Utilities>USB Utilities>DAS Download menu, as
follows:
1. Insert a flash drive into a front panel USB port and wait for the Status field to
60
•
downloading Data Acquisition System (DAS) data from the instrument to
a flash drive (presented below).
updating firmware (presented below and in Section 7.3).
•
•
copying a configuration from one instrument to other same-model
instruments (presented below).
•
downloading a basic operation functionality report (presented below and
in Section 7.2)
Figure 3-7. USB Utilities Pages
DAS (D
A
ATA
CQUISITION
indicate that the drive has been detected; available buttons will be enabled.
S
) D
YSTEM
ATA
083730750B DCN8606
Advertisement
Table of Contents
Troubleshooting
