Table of Contents
Advertisement
6. Insert a flash drive into either of the two front panel USB ports.
7. When the Status field indicates that the USB drive has been detected,
8. When the Status field indicates that the upload is complete, remove the
G
ENERATING A
The Report page is used typically for monitoring the functionality of the instrument.
Because it is used in maintenance and troubleshooting, the Report feature is presented in
Section 7.2.
Diagnostics
The Diagnostics menu provides access to several diagnostics submenus, which can be
helpful in troubleshooting (Section 8). When an item in the menu is selected, the display
shows its description. Table 3-1 on page 53 also provides descriptions.
Note
.
S
(C
3.3.
ETUP
ONFIGURING THE
Use the Setup menu to configure the instrument's software features, to gather information
on the instrument's performance, and to configure and access data from the Datalogger,
the instrument's internal data acquisition system (DAS). Once the setups are complete, the
saved configurations can be downloaded to a USB drive through the Utilities>USB
Utilities menu and uploaded to other instruments of the same model.
62
press the "Upload Configuration to Instrument" Start button.
flash drive.
R
EPORT
Some Diagnostics items do not appear in the menu unless the
instrument
has
Home>Generate menu).
C
ALIBRATOR
been
placed
in
Standby
'
F
/F
S
EATURES
UNCTIONS
mode
(see
)
083730750B DCN8606
Advertisement
Table of Contents
Troubleshooting
