preceded by a control-A and a period (.) and then followed by a "!" and a two digit
checksum.
EXAMPLE:
^A.xxx!nn
A T750/T750U equipped with LEADS software can be simultaneously operated over the
same COM port using standard Teledyne API's serial data commands.
Activating Levels
Levels are individually started and stopped either by an operator locally by using the
touchscreen menu or remotely through a serial data operation over the RS-232 or Ethernet
ports.
To activate an existing Level, from Home page navigate to the Generate menu, press the
LEVEL button, then select the Level by its ID, and press the Generate button. To stop,
press the Standby button.
98
083730750B DCN8606