Table of Contents
Advertisement
When all Alerts are cleared, the Alerts menu tab no longer shows the caution symbol, and
a green LED replaces the caution symbol in the bottom right corner of the interface
(Figure 3-5). However, Alerts can reappear if the conditions causing them are not resolved.
For troubleshooting guidance, refer to the instrument's user manual.
Figure 3-5. Active Alerts Cleared
G
ENERATE
The Generate menu is used to generate the desired calibration gas mixtures after initial gas
setup (Section 3.3.12, Setup>Gas). The Generate menu is presented in greater detail in
Section 4.2.
Figure 3-6. Generate Menu (GPT buttons available with O
Generator Option)
3
U
TILITIES
The Utilities menu opens to the Datalog View, the Alerts Log, the USB Utilities, and the
Diagnostics submenus.
Datalog View
The Datalog View tab displays a list of data logs that were configured in the Setup>Data
Logging menu (Section 3.3.1). From this list a log can be selected and filters applied to
view the desired data.
59
083730750B DCN8606
Advertisement
Table of Contents
Troubleshooting
