Dräger Primus Infinity Empowered Instructions For Use Manual page 264

Technical data
Pin assignment:
1
2
3
4
5
6
7
8
9
Shields
Settings
IV System (Dräger Base)
SpO
2
264
NC, not connected
TX, transmit
RX, receive
DTR, data terminal ready
GND, ground
DSR, data set ready
RTS, request to send
CTS, clear to send
NC, not connected
DTR and DSR, as well as RTS and CTS are internally con-
nected. Hardware handshake is not supported.
1200 or 9600 Baud
Even parity
8 data bits
1 stop bit
Power supply for IV System
For connecting an SpO
Instructions for use Primus Infinity Empowered SW 4.5n
sensor
2