Dräger Primus Infinity Empowered Instructions For Use Manual page 228

Cleaning, disinfection and sterilization
Items which can be re-
processed
Primus Infinity
Empowered worksta-
tion
Power cable, com-
pressed gas hoses, po-
tential equalization ca-
ble
Breathing hoses
Y-piece
Breathing bag with con-
nector and hose
Flexible arm for breath-
ing bag (optional)
1)
Ventilator diaphragm
Cover of breathing sys-
tem with APL valve
Middle and bottom part
of breathing system
Expiratory port/inspira-
tory port
Absorber and insert
Spirolog/SpiroLife flow
sensors
Anesthetic gas receiv-
ing system AGS
1) Drain any water which may have collected in the ventilator diaphragm.
Larger quantities of condensation may impair operation of the workstation and/or lead to failure of the equipment!
2) The valve plate must be sterilized after washing in order to dry it. Correct operation of the workstation may be impaired and
lead to failure of the workstation if the control areas in the valve plate are not dried completely.
228
Recommended re- Preclean-
processing inter-
vals
Daily
Monthly
Daily yes
Daily yes
Weekly yes
Weekly
Weekly yes
Weekly yes
Weekly yes
Weekly yes
Note the instructions for use of the flow sensors.
Note the instructions for use of the AGS.
Machine
ing cleaning
and disin-
fection
no no
no no
yes
ing instructions for use.
yes
ing instructions for use.
yes
no yes
yes
yes
yes
yes
Instructions for use Primus Infinity Empowered SW 4.5n
Manual
Cleaning Disinfec-
tion
Outside no
yes no
Observe correspond-
no yes
Observe correspond-
no yes
no yes
no yes
no yes
no yes
no yes
Steriliza-
tion
no
no
yes
yes
yes
yes
2)
yes
2)
yes
yes
yes