Covidien Valleylab LS10 Service Manual page 46

Periodic Safety Check (Routine Maintenance)
High Frequency Leakage
Important:
– A computer with USB connections is required to execute the RF High Frequency
– Please monitor the True RMS meter throughout this test because you will need to
– The pass/fail criteria, which includes the data sheet for the RF Leakage check can
Remove the USB port cover from the rear of the generator.
1.
Connect the AC cable to the generator to power on the generator.
2.
3-10
Leakage check.
record the measurements from the meter while the energy was being delivered.
be found in the service manual section called Preventative Maintenance Check
Sheet/High-Frequency Leakage.
Valleylab LS10, LS Series Single Channel Vessel Sealing Generator Service Manual