Item
Description
4
Drive status LED
5
Adapter ejection release latch and
handle
DSC-25 2-port SFP28 card ports and LEDs
Ports
Table 1: Ports
Item
1
2
3
LEDs
The HPE for Pensando DSP DSC-25 2p SFP28 card is a dual-port, single-slot, half-height, half-length (HHHL) SFP28
network adapter. It has LEDs for Link (L) and Activity (A) for each port. A half-height bracket is shown in the following
illustration with SFP28 ports and LEDs.
Status
•
Off—The drive is not configured by a RAID controller
•
Solid green—The drive is a member of one or more logical
drives
•
Flashing green (4 Hz)—The drive is operating normally and
has activity
•
Flashing green (1 Hz)—The drive is rebuilding or
performing a RAID migration, stripe size migration, capacity
expansion, logical drive extension, or is erasing
•
Flashing amber/green (1 Hz)—The drive is a member of one
or more logical drives that predicts the drive will fail
•
Solid amber—The drive has failed
•
Flashing amber (1 Hz)—The drive is not configured and
predicts the drive will fail
Removes the SFF flash adapter when released
Port
Management port
Network interface port
Network interface port
Description
1GbE RJ45
10/25G SFP+ based
10/25G SFP+ based
36
Component identification