Nvme Ssd Button Actions - HPE ProLiant DL385 User Manual

Item LED
3 Drive
status
4 Do not
remove
5 Power

NVMe SSD button actions

Status Definition
Solid green The drive is a member of one or more logical drives.
The drive is doing one of the following:
Flashing green
• Rebuilding
• Performing a RAID migration
• Performing a stripe size migration
• Performing a capacity expansion
• Performing a logical drive extension
• Erasing
Flashing amber/ The drive is a member of one or more logical drives and predicts the drive will fail.
green
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
Solid white Do not remove the drive. The drive must be ejected from the PCIe bus prior to
removal.
Flashing white The drive ejection request is pending.
Off The drive has been ejected.
Solid green Do not remove the drive. The drive must be ejected from the PCIe bus prior to
removal.
Flashing green The drive ejection request is pending.
Off The drive has been ejected.
34
Component identification