Figure 184. Securing power supply bracket
Note: Hold the power supply bracket in place while installing or removing the screws.
a.
Install the outer screw.
b.
Install the inner screw.
After you finish
1. Reinstall the PCIe riser. See
2. Reinstall the rear top cover. See
3. Reinstall the front top cover. See
4. Reinstall the power supply unit. See
5. Complete the parts replacement. See
Demo video
Watch the procedure on YouTube
Power supply key (CFFv4) replacement
Follow the instructions in this section to remove or install a power supply key (CFFv4).
Remove a power supply key (CFFv4)
Follow the instructions in this section to remove a power supply key (CFFv4).
About this task
S002
ThinkSystem SR860 V3 User Guide
228
"Install the PCIe riser" on page
"Install the rear top cover" on page
"Install the front top cover" on page
"Install a hot-swap power supply unit" on page
"Complete the parts replacement" on page
187.
276.
278.
281.
235.