Install The Pcie Riser - Lenovo ThinkSystem SR860 V3 User Manual

Figure 133. Installing PCIe adapter to riser
a. Align the adapter with the connector on the PCIe riser; then, carefully press the PCIe
adapter straight into the slot until it is securely seated and its bracket also is secured.
b. Secure the adapter with a screw.
c. Pull the plunger that secures the PCIe adapter retainer.
d. Close the PCIe adapter retainer to the locked position.
After you finish
1. Reinstall the PCIe riser. See
2. Reinstall the crossbar. See
3. Reinstall the rear top cover. See
4. Reinstall the front top cover. See
5. Complete the parts replacement. See
Demo video
Watch the procedure on YouTube

Install the PCIe riser

Follow the instructions in this section to install the PCIe riser.
About this task
Attention:
• Read "Installation Guidelines" on page 43
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
"Install the PCIe riser" on page
"Install the crossbar" on page
"Install the rear top cover" on page
"Install the front top cover" on page
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 44
58.
187.
112.
276.
278.
.
Chapter 5 Hardware replacement procedures
281.
to ensure that you
187