Table of Contents
Advertisement
Figure 57. Connecting cable to SATA/x4 NVMe M.2 boot adapter
SATA/NVMe M.2 boot adapter
Figure 58. Connecting cable to SATA/NVMe M.2 boot adapter
1.
Connect the cables to the M.2 boot adapter.
2.
Tighten the captive screw with a screwdriver to secure the cable to the M.2 boot adapter.
Step 6.
If applicable, connect the flash power module to an adapter with the extension cable that comes
with the flash power module. See
information on the internal cable routing.
ThinkSystem SR860 V3 User Guide
102
"Flash power module cable routing" on page 417
for more
Advertisement
Chapters
Table of Contents
