Power On And Power Off The Server; Power On The Server - Lenovo ThinkSystem SR860 V3 User Manual

Installation priority
7
8
9
10
11
12

Power on and power off the server

Follow the instructions in this section to power on and power off the server.

Power on the server

After the server performs a short self-test (power status LED flashes quickly) when connected to input power,
it enters a standby state (power status LED flashes once per second).
Power button location and power LED are specified in:
• Chapter 2 "Server components" on page 17
• "Troubleshooting by system LEDs and diagnostics display" on page 445
The server can be turned on (power LED on) in any of the following ways:
• You can press the power button.
• The server can restart automatically after a power interruption.
• The server can respond to remote power-on requests sent to the Lenovo XClarity Controller.
For information about powering off the server, see
Component
1. ThinkSystem Nvidia ConnectX-7 NDR200/
HDR QSFP112 2-Port PCIe Gen5 x16
InfiniBand Adapter
2. ThinkSystem Mellanox ConnectX-6 Dx
100GbE QSFP56 2-port PCIe Ethernet
Adapter
3. ThinkSystem Broadcom 57508 100GbE
QSFP56 2-port PCIe 4 Ethernet Adapter
4. ThinkSystem Mellanox ConnectX-6 Lx 10/
25GbE SFP28 2-Port PCIe Ethernet Adapter
10/25GbE SFP28 4-Port PCIe Ethernet Adapter
1. 10/25GbE SFP28 2-port PCIe Ethernet
Adapter
2. 10GBase-T Ethernet Adapter
3. RJ45 Ethernet Adapter
4. PCIe Fibre Channel Adapter
5. FC HBA adapter
6. External RAID/HBA adapter
10/25GbE SFP28 4-Port OCP Ethernet Adapter
Management NIC adapter
OCP module
"Power off the server" on page
PCIe slot priorities
20, 8, 18, 6, 16, 4, 19, 7
20, 8, 18, 6, 19, 7, 16, 4, 15, 3, 17, 5
20, 8, 14, 11, 18, 6, 19, 12, 13, 7, 9,
10, 16, 4, 15, 3, 17, 5
1
1
1,2
58.
.
Chapter 5 Hardware replacement procedures
57