Lenovo ThinkSystem SR860 V3 User Manual page 167

• Go to "Update the firmware" on page 435
Procedure
Step 1. If applicable, connect the cables to the M.2 boot adapter.
SATA/x4 NVMe M.2 boot adapter
Figure 108. Connecting cable to SATA/x4 NVMe M.2 boot adapter
SATA/NVMe M.2 boot adapter
Figure 109. Connecting cable to SATA/NVMe M.2 boot adapter
1. Connect the cables to the M.2 boot adapter.
2. Tighten the captive screw with a screwdriver to secure the cable to the M.2 boot adapter.
Step 2. Install M.2 boot adapter.
for more information on firmware updating tools.
Chapter 5
.
Hardware replacement procedures
157