Figure 216. Removing front top cover
Attention:
• Service label is located on the inside of the front top cover.
• For proper cooling and air flow, install the front and rear top covers before you power on the
server. Operating the server with the top covers removed might damage server components.
a.
Press the blue button on the front top cover release latch.
b.
Rotate the end of the latch up until it is in vertical position.
c.
Lift the front top cover to remove it.
After you finish
1. Install a replacement unit. See
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Remove the rear top cover
Follow the instructions in this section to remove the rear top cover.
About this task
S014
ThinkSystem SR860 V3 User Guide
274
"Install the front top cover" on page
278.