Lenovo ThinkSystem SR860 V3 User Manual page 218

Figure 161. Installing cover to riser
Install a PCIe riser card and cage to six slot HH riser
Note: A Gen 4 riser is used as an example for illustration. The replacement procedure for a Gen 5 riser is
similar.
Procedure
Step 1. If necessary, attach the labels onto the straight-end of the PCIe riser cables.
Note: See "PCIe riser 2 cable routing" on page 426
cables.
Figure 162. PCIe riser cable
Straight-end of cable (connects to system board
1
assembly)
Label (located near straight-end of cable)
2
ThinkSystem SR860 V3 User Guide
208
to identify the corresponding labels for the
Right-angle end of cable (connects to riser card)
3
Label sheet for PCIe riser cable (from labels kit)
4