Install A Fan Module - Lenovo ThinkSystem SR860 V3 User Manual

After you finish
1. Reinstall all fan modules. See
2. Reinstall the front top cover. See
3. Complete the parts replacement. See
Demo video
Watch the procedure on YouTube

Install a fan module

Follow the instructions in this section to install a hot-swap fan.
About this task
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention:
• Read "Installation Guidelines" on page 43
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
"Install a fan module" on page
"Install the front top cover" on page
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 44
58.
131.
278.
281.
.
Chapter 5 Hardware replacement procedures
to ensure that you
131