Lenovo ThinkSystem SR860 V3 User Manual page 205

Step 2. Remove the five screws that secure the PCIe riser card; then, remove the PCIe riser card from the
PCIe riser cage.
Figure 140. Removing PCIe riser card from riser
Remove a PCIe riser card and cage from six slot FH riser
Note: A Gen 4 riser is used as an example for illustration. The replacement procedure for a Gen 5 riser is
similar.
Procedure
Step 1. Make preparation for the task.
a. Remove the front top cover. See
b. Remove the rear top cover. See
c. Remove the crossbar. See
d. Remove the PCIe riser. See
e. Remove the 7mm drive cage. See
f. Remove all the PCIe adapters. See
Step 2. Remove the two screws and the cover.
"Remove the front top cover" on page
"Remove the rear top cover" on page
"Remove the crossbar" on page
"Remove the PCIe riser" on page
"Remove the 7mm drive cage" on page
"Remove a PCIe adapter" on page
272.
274.
109.
174.
74.
179.
.
Chapter 5 Hardware replacement procedures
195