Lenovo ThinkSystem SR860 V3 User Manual page 396

SAS/SATA cable routing to riser 3
Note: Depending on your configuration, the RAID/HBA adapter will be installed in different riser locations.
From
BP1: SAS/SATA
1
BP2: SAS/SATA
2
BP3: SAS/SATA
3
BP4: SAS/SATA
4
BP5: SAS/SATA
5
BP6: SAS/SATA
6
3 x AnyBay backplanes
Use this section to understand the signal cable routing for three AnyBay backplanes.
Notes:
• Ensure that you observe the installation rules and sequence order in
rules and order" on page 55
• For more information on the power cable routing, see
page 292.
ThinkSystem SR860 V3 User Guide
386
To
32i Gen 4: C0
32i Gen 4: C1
32i Gen 4: C2
32i Gen 4: C0
32i Gen 4: C1
32i Gen 4: C2
and "Drive backplane installation rules and order" on page
SAS/SATA cable routing to riser 1
Cable
Gen 4: SlimSAS x8 to SlimSAS x8
(1000 mm)
Gen 4: SlimSAS x8 to SlimSAS x8
(1000 mm)
Gen 4: SlimSAS x8 to SlimSAS x8
(1000 mm)
Gen 4: SlimSAS x8 to SlimSAS x8
(1000 mm)
Gen 4: SlimSAS x8 to SlimSAS x8
(1000 mm)
Gen 4: SlimSAS x8 to SlimSAS x8
(1000 mm)
"PCIe riser and adapter installation
"2.5-inch drive backplane power cable routing" on
54.