Figure 217. Removing rear top cover
a.
Loosen the two thumbscrews on the rear of the server.
b.
Slide the rear top cover towards the rear of the server and lift to remove it.
After you finish
1. Install a replacement unit. See
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install the rear top cover
Follow the instructions in this section to install the rear top cover.
About this task
S014
ThinkSystem SR860 V3 User Guide
276
"Install the rear top cover" on page
276.