Figure 151. Removing PCIe riser card from riser
After you finish
1. If you are replacing a FHFL or HHFL PCIe riser cage and reusing the PCIe riser board, remove the PCIe
riser extenders. See
2. Install a replacement unit. See
3. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install a PCIe riser card and cage
Follow the instructions in this section to install a PCIe riser card and cage.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
"Remove a PCIe riser extender" on page
"Install a PCIe riser card and cage" on page
212.
201.
.
Chapter 5
Hardware replacement procedures
201