Lenovo ThinkSystem SR860 V3 User Manual page 157

Figure 98. Removing the link connector cover from GPU
Step 2. Align the GPU adapter link bridge to the link connectors on the GPUs; then, install the GPU adapter
link bridge to the GPUs until it clicks into place.
Figure 99. Installing the GPU adapter link bridge
Step 3. Repeat Step 2 on page 147
Note: When linking a GPU pair, all link connectors on the GPUs must be linked.
After you finish
1. Reinstall the PCIe riser. See
2. Reinstall the crossbar. See
3. Reinstall the rear top cover. See
to install the other GPU adapter link bridges.
"Install the PCIe riser" on page
"Install the crossbar" on page
"Install the rear top cover" on page
187.
112.
276.
.
Chapter 5 Hardware replacement procedures
147