Update The Vital Product Data (Vpd) - Lenovo ThinkSystem SR860 V3 User Manual

14. Reinstall all the power supply units. See
15. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside the server.
16. Reconnect the power cords and any cables that you removed.
17. Power on the server and any peripheral devices. See
18. Update the vital product data (VPD). See
Machine type number and serial number can be found on the ID label, see
access the Lenovo XClarity Controller" on page
19. If hiding TPM or updating TPM firmware is needed, see
the TPM firmware" on page
20. Optionally, enable UEFI Secure Boot. See
21. Download and install the latest device drivers:
thinksystem/sr860v3/7d93/downloads/driver-list/
22. Update the system and device firmware. See
Note: (Lenovo trained technician only) If you have replaced the firmware and RoT security module,
update the firmware to the specific version supported by the server. See
glosse4lenovo.lenovo.com/wiki/glosse4lenovo/view/How%20To/System%20related/
How%20to%20do%20RoT%20Module%20FW%20update%20on%20ThinkSystem%20V3%20machines/
Demo video
Watch the procedure on YouTube

Update the Vital Product Data (VPD)

Use this topic to update the Vital Product Data (VPD).
• (Required) Machine type
• (Required) Serial number
• (Optional) Asset tag
• (Optional) UUID
Recommended tools:
• Lenovo XClarity Provisioning Manager
• Lenovo XClarity Essentials OneCLI commands
Using Lenovo XClarity Provisioning Manager
Steps:
1. Start the server and press the key according to the on-screen instructions. The Lenovo XClarity
Provisioning Manager interface is displayed by default.
2. Choose System Summary. The "System Summary" tab page is displayed.
3. Click Update VPD, then, follow on-screen instructions to update the VPD.
Using Lenovo XClarity Essentials OneCLI commands
• Updating machine type
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]
• Updating serial number
ThinkSystem SR860 V3 User Guide
268
"Install a hot-swap power supply unit" on page
"Update the Vital Product Data (VPD)" on page
39.
270.
"Enable UEFI Secure Boot" on page
https://datacentersupport.lenovo.com/products/servers/
.
"Update the firmware" on page
"Power on the server" on page
"Identify the server and
"Hide/observe TPM" on page 269
https://
235.
57.
268.
or "Update
271.
435.
.