Figure 159. Removing cover from riser
Step 9.
Connect the right-angle end of the PCIe riser cables labeled R1-1, R1-3, R1-6, and R1-8 (R3-1,
R3-3, R3-6, and R3-8) to the corresponding connectors on the outside of the PCIe riser.
Figure 160. Connecting PCIe riser cables to outside of riser
Step 10. Install the cover onto the PCIe riser cage; then, install two screws to secure the cover.
.
Chapter 5
Hardware replacement procedures
207