Lenovo ThinkSystem SR860 V3 User Manual page 202

Step 4. Install PCIe riser 2.
Figure 138. Installing PCIe riser 2
a. Connect all internal cables to the PCIe adapters.
b. Align and install the PCIe riser until it rests firmly on top of the kickstand.
c. Connect the PCIe riser 2 assembly cables to the system board assembly. See
cable routing" on page 426
Step 5. Connect and route all internal cables to the backplanes and flash power modules. See
drive backplane cable routing" on page 292
for more information on the internal cable routing.
Install PCIe riser 2
Procedure
Step 1. If necessary, install the PCIe adapters. See
Step 2. If a PCIe riser filler has been installed, remove it.
Step 3. Install PCIe riser 2.
ThinkSystem SR860 V3 User Guide
192
for more information on the internal cable routing.
and "Flash power module cable routing" on page 417
"Install a PCIe adapter" on page
"PCIe riser 2
"2.5-inch
183.