Equipment Package Contents; Installing The Cm7000 - LEGRAND CM7000 User Manual

Equipment Package Contents

The CM7000 package contains:

CM7000 IP Camera

Wall Plate

Installation Sheet

Installing the CM7000

Run Cat 5 cable from enclosure mounted device supplying power over Ethernet (PoE) to single gang box
at intended camera location. The Legrand DA2400 and DA1458 are suitable PoE products.
Attach Cat 5 cable with Ethernet PoE to Camera cable RJ45 jack and feed Camera cables through hole
in supplied Wallplate, and mount Wallplate to single gang box using rubber gasket.
Attach Camera to Wallplate using 3 provided screws and position camera for use.
Cat 5 cable
connection
4
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800)-321-2343
©Copyright 2014 by Legrand
All Rights Reserved.
www.legrand.us