Advertisement
Installing the Wall Mount
The camera is shipped with a wall mount, which can be inverted.
You can install the camera wall mount to a display mount or directly to drywall. If you mount it to drywall,
use wall anchors.
The mount can also be installed on a tripod. Use a 1/4-20 hex nut to secure the mount to the 1/4-20
screw on the tripod head. Then tilt the tripod head.
Installing the Camera and Connecting Power
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in
equipment damage and will void the warranty.
1. Slide the camera into the mount. It should be a tight fit.
2. Connect all required cables to the camera.
3. Secure the cable cover to the mount.
4. Connect the mid-span power injector to mains power.
About Inverted Installation
If you install the camera with the connector panel pointing up, you will need to select the camera's Image
Flip setting when configuring behavior and performance. Image Flip orients the video image correctly.
Installation Guide for the IntelliSHOT-M Auto-Tracking Camera
6
Advertisement
