Individual Functions; Using The Timer Function - Omron SYSDRIVE 3G3RV Series User Manual

Individual Functions

This section explains the individual functions used in special applications.
K K K K

Using the Timer Function

Multi-function contact input terminals S3 to S7 can be designated as timer function input terminals, and multi-
function output terminals M1-M2, M3-M4, M5-M6, P1-PC, and P2-PC can be designated as timer function
output terminals. By setting the delay time, you can erase chattering from the sensors and switches.
Set one of the parameters H1-01 to H1-05 (multi-function contact input terminal S3 to S7) to 18 (timer
•
function input).
Set H2-01 to H2-03 (multi-function output terminals M1-M2, M3-M4, M5-M6, P1-PC, and P2-PC func-
•
tion selection) to 12 (timer function output).
nRelated Parameters
Param-
eter
Num-
ber
Timer function ON-delay
time
b4-01
Delay-ON Timer
Timer function OFF-delay
time
b4-02
Delay-OFF Timer
* For (-E) models.
nSetting Example
When the timer function input ON time is longer than the value set in b4-01, the timer output function is
turned ON. When the timer function input OFF time is longer than the value set in b4-02, the timer output
function is turned OFF. An example of timer function operation is given in the following diagram.
Timer function input
Timer function output
-116
6
Name
LCD Display
Set the timer function output ON delay time (dead
band) for the timer function input in 1-second
units. Enabled when a timer function is set in H1-
oo and H2-oo.
Set the timer function output OFF delay time
(dead band) for the timer function input in 1-sec-
ond units. Enabled when the timer function is set
in H1-oo and H2-oo.
Fig 6.74 Timer Function Operation Example
Setting
Description
Range
0.0 to
300.0
(0.0 to
3000.0)
0.0 to
300.0
(0.0 to
3000.0)
Control Methods
Change
Factory during
Setting Opera-
V/f
tion
0.0 s No A
*
0.0 s No A
*
Open
V/f
Loop
with
Vec-
PG
tor
A A
A A