Appendix K - Sensor Status - GO Systemelektronik BlueBox T4 Manual

B l u e B o x – S e n s o r S t a t u s
Appendix K – Sensor Status
Sensor status Description
30 AMS formula error
31 Unknown sensor is used in the formula
32 Measurement value is not saved
33 The calculation time in an AMS formula has been exceeded (for or
50 Underrun of the minimum measured value as determined in AMS.
51 Overrun of the maximum measured value as determined in AMS.
52 Communication error with the sensor
53 Underrun of the lower limit of the AD converter
54 Overrun of the upper limit of the AD converter
55 General device error
GO Systemelektronik GmbH
0 Sensor sends data.
1 Sensor sends no data.
2 New sensor – momentarily at sensor initialization
3 Sensor-ID had been assigned – momentarily at sensor initialization
4 Spectrometer sensor alert at outlier-recognition
5 Measurement value is under the detection limit
6 Sensor calibration failure
while loop).
– only at virtual sensors
– only at virtual sensors
Faluner Weg 1 24109 Kiel
www.go-sys.de
Germany Tel.: +49 431 58080-0
info@go-sys.de
Page 99 / 99
Fax: -58080-11