B l u e B o x – D i s p l a y A d j u s t m e n t
Appendix A – Adjustment of the Touch Display
If the display responses not, wrong or under large pressure, a display adjustment is necessary.
While switching on power, press display until
the notice
"touch adjustment ?
don't touch for normal use"
appears.
Left off the display immediately!
Press the display immediately again for more
than one second.
A blinking dot appears at top left.
Press the blinking dot top left.
A blinking dot appears at bottom right.
Press the blinking dot bottom right.
The adjustment is finished.
GO Systemelektronik GmbH
Faluner Weg 1
24109 Kiel
www.go-sys.de
Germany
Tel.: +49 431 58080-0
info@go-sys.de
touch adjustment ?
don't touch for normal use
touch adjustment ?
don't touch for normal use
touch adjustment ?
don't touch for normal use
- touch this blinking dot
<
touch this blinking dot ->
Page 82 / 99
Fax: -58080-11
Need help?
Do you have a question about the BlueBox T4 and is the answer not in the manual?