B l u e B o x – M e n u O p e r a t i o n
8.2.2 Sensors List
Main menu 8.2
Sensors
Use this menu to access the menus of the connected sensors.
The buttons of the sensors are arranged alphabetically. If necessary you can change a sensor name with the
AMS software.
In the example chosen here is the
Oxygen
pH value
Temperature
<–
The two internal current outputs are listed as sensors. The calibration of the current outputs is done only with
the AMS software (AMS is part of the BlueBox PC Software).
see also 8.2.5 Current Output
GO Systemelektronik GmbH
Oxygen
pH value
Temperature
1st Sensor, an oxygen sensor.
2nd Sensor, a pH sensor.
3rd Sensor, a temperature sensor.
Switches to the menu of the oxygen sensor.
Switches to the menu of the pH sensor.
Switches to the menu of the temperature sensor.
Scrolls the list.
Switches back to the Main menu.
Faluner Weg 1
24109 Kiel
www.go-sys.de
1/1
<–
Germany
Tel.: +49 431 58080-0
info@go-sys.de
Page 66 / 99
Fax: -58080-11
Need help?
Do you have a question about the BlueBox T4 and is the answer not in the manual?