Service Mode - GO Systemelektronik BlueBox T4 Manual

Hide thumbs Also See for BlueBox T4:
Table of Contents

Advertisement

B l u e B o x – M e n u O p e r a t i o n

8.2.6 Service Mode

Main menu 8.2
Ser vice
Ser vice
In this menu you can handle the service mode.
If you enable the service mode the displayed time runs down. In this time:
If a spectrometer is connected, there will be a request whether the compressed air cleaning of the spectrome-
ter has to be deactivated in the service time.
After the expiry of the displayed time the service mode will be disabled.
The service mode is useful for system maintenance, it suppresses the recording of measurement irrelevant
maintenance data.
Enable
ser vice mode
disable
ser vice mode
Time+
<–
Once the maintenance time has elapsed, the display switches back to the main menu.
GO Systemelektronik GmbH
08:14:45
12.09.14
Enable
ser vice mode
<–
• no data is recorded (exception: spectra are recorded)
• no actuator is switched
• no Modbus data is changed.
Enable the service mode.
Disables the service mode.
Extends the service time for 30 min.
Switches back to the Main menu.
Faluner Weg 1
24109 Kiel
www.go-sys.de
Ser vice
00:26:38
disable
ser vice mode
Germany
Tel.: +49 431 58080-0
info@go-sys.de
08:14:45
12.09.14
Time+
<–
Page 80 / 99
Fax: -58080-11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BlueBox T4 and is the answer not in the manual?

This manual is also suitable for:

Bluebox t3Bluebox t4 basic

Table of Contents