B l u e B o x – M e n u O p e r a t i o n
8.1.1 Parameter Display Single
Here, as an example, the Parameter display of an oxygen sensor with integrated temperature sensor and a ph
sensor.
The measured value of a sensor is displayed for 6 s, thereafter the display switches in a cycling way to the dis-
play of the next sensor. The order is alphabetical.
Status and Error messages appear instead of the parameter (see Appendix J – Status and Error Messages).
Switches to the parameter display of the previous sensor.
Switches the cycling of the parameter display off.
Switches to the parameter display of the next sensor.
Switches the cycling of the parameter display off.
Switches the cycling of the parameter display on and off.
The button is also a status indicator.
Switches to the Main menu.
Menu
Cycling on: In the upper right corner time and date is displayed.
Cycling off: In the upper right corner time and date of the last measurement is displayed.
The bar graph on the left side of the display shows the current measured value.
GO Systemelektronik GmbH
1. Oxygen
2. Temperature
3. pH value
20
Oxygen
10 mg/l
14
0
11 pH
60
0
0
Faluner Weg 1
24109 Kiel
www.go-sys.de
09:19:39
10.07.10
09:19:39
10.07.10
pH value
Menu
Temperature
Menu
18°C
Germany
Tel.: +49 431 58080-0
info@go-sys.de
Settings via 8.2.1.6 Display
09:19:39
10.07.10
Menu
colour display
Page 34 / 99
Fax: -58080-11
Need help?
Do you have a question about the BlueBox T4 and is the answer not in the manual?