Umts Settings - GO Systemelektronik BlueBox T4 Manual

B l u e B o x – M e n u O p e r a t i o n

8.2.1.4.4 UMTS Settings

Modem menu 8.2.1.4
UMTS
From this menu, you set up your UMTS connection. For APN, username and password, contact your UMTS
provider.
Input APN (Access Point Name)
APN
Input Username (Login name)
Username
Input Password (Login password)
Password
Routing disabled
Routing enabled
Switches back to the Modem Menu.
<–
The routing must be switched on, if you use this BlueBox as an Internet router. This is for example the case,
when via this BlueBox other BlueBoxes send measured values.
Please note that the connected BlueBoxes must use the IP address of the routing BlueBox as the address of
the default gateway see 8.2.1.1.3).
GO Systemelektronik GmbH
UMTS settings
APN
Username
Routing disabled
Switches the routing on and off.
The button is also a status indicator.
Factory default: routing off
Faluner Weg 1 24109 Kiel
www.go-sys.de
Password
<–
Germany Tel.: +49 431 58080-0
info@go-sys.de
Page 60 / 99
Fax: -58080-11