B l u e B o x
1.3 Technical Data BlueBox T4 Basic
Computer:
Display black and white:
Display coloured:
Storage media:
Mechanical data:
Power supply:
Interfaces:
Modem (optional):
Ambient conditions:
To ensure equipment protection and the proper functioning of the device, the above conditions are strictly to be
adhered to!
∗
The connected modules receive their power from the BlueBox. Some modules have a constricted input range, so there is a
input voltage tolerance of ± 10%.
GO Systemelektronik GmbH
PC 104, 200 MHz to 500 MHz
Operation system: Embedded Linux®
Main memory 256 MB
Touchpanel 240 x 128 pixel
Touchpanel 480 x 272 pixel
Industrial CompactFlash card 256 MB; 512 Mb; 2 GB
Housing dimensions:
Weight:
IP code (housing):
Die-cast aluminium housing, powder coated
Colour:
Nominal voltage:
Nominal power:
additionally max. 1.85 A via the output to the modules
1 x CAN
1 x USB (not TS and TC)
1 x Ethernet 10 or 100 Mbit/s
1 x RS-232 or RS-485 (half-duplex)
2 x current output 4 mA – 20 mA
Modem HSPA or Modem ISDN/analogue
Ambient temperature: Storage:
Relative humidity:
Faluner Weg 1
24109 Kiel
www.go-sys.de
280 mm x 170 mm x 90 mm (W x L x H)
approx. 2.5 kg
IP65
RAL 5010
24 V DC (18 V – 28 V)
10 W
-10 °C to +50 °C
Operation:
-20 °C to +45 °C
avoid direct sunlight
≤ 90 % (annual average)
Germany
Tel.: +49 431 58080-0
info@go-sys.de
Article-No. 486 0003
∗
Page 10 / 99
Fax: -58080-11
Need help?
Do you have a question about the BlueBox T4 and is the answer not in the manual?