The Menu Operation; Parameter Display - GO Systemelektronik BlueBox T4 Manual

B l u e B o x – M e n u O p e r a t i o n

8 The Menu Operation

The BlueBox T4 has a coloured display.
The BlueBox T4 Basic has in newer versions a coloured display, versions with black and white display are no
longer available.
The operation at the black and white display is almost identical to the operation on the colour display and
differs most in the Parameter display (see 8.1 Parameter Display and following).
The operation at the colour display is described here only for the 8-way Parameter display.

8.1 Parameter Display

Displayed are:
There are three display options:
The selection of the display option is carried out via 8.2.1.6 Display.
When there is no user activity in all other menus (except input menus) for 2 minutes, the software switches
back to the Parameter display.
∗
The status of an actuator can also be understood as a measurement value.
GO Systemelektronik GmbH
• the internal sensors and actuators
• the virtual (calculated) sensors
• the possibly connected external CAN-bus sensors
• the possibly connected external CAN-bus actuators
• Only selected sensors and actuators are displayed.
Selection via 8.2.2.1 Sensor menu and 8.2.4.1 Actuator menu
• All sensors and actuators are displayed.
• All sensors are displayed.
Faluner Weg 1 24109 Kiel
www.go-sys.de
∗
Germany Tel.: +49 431 58080-0
info@go-sys.de
1
Page 33 / 99
Fax: -58080-11