Parameter Display 6-Way - GO Systemelektronik BlueBox T4 Manual

B l u e B o x – M e n u O p e r a t i o n

8.1.2 Parameter Display 6-way

Here, as an example, the Parameter display of more than 6 sensors.
The measured values of the first 6 sensors are displayed for 6 s, the order is alphabetical. Thereafter the dis-
play switches in a cycling way to the display of the next sensors.
In comparison with the single parameter display status and error messages are displayed shortened.
Switches to the Parameter display of the previous sensor.
Switches the cycling of the Parameter display off.
Switches to the Parameter display of the next sensor.
Switches the cycling of the Parameter display off.
Switches the cycling of the Parameter display on and off.
The button is also a status indicator.
Switches to the Main menu.
Menu
In the upper left corner you see the page number of the current display and the number of pages (in this case
1/2).
In the upper right corner time and date is displayed.
GO Systemelektronik GmbH
1/2
air pessure
1006.91 hPa
humidity
39.8 %
pH value
11 pH
Faluner Weg 1 24109 Kiel
www.go-sys.de
09:19:39
10.07.10
oxygen
10 mg/l
temperature outside
18 °C
temperatur inside
22 °C
Menu
Germany Tel.: +49 431 58080-0
info@go-sys.de
Settings via 8.2.1.6 Display
Colour display
Page 35 / 99
Fax: -58080-11