Essential Properties Of The Bluebox System - GO Systemelektronik BlueBox T4 Manual

B l u e B o x

1.1 Essential Properties of the BlueBox System

The BlueBox is the central element of the BlueBox-System. The BlueBox-System is a modular designed meas-
urement and control system.
The BlueBox is connected via CAN (Controller Area Network) technology with sensors and actuators.
For data proccessing and communication the BlueBox is equipped with the common interfaces.
•
Due to its modular structure the BlueBox system can handle almost every conceivable measurement and
control tasks.
•
A BlueBox can be connected with up to 200 sensors or actuators. The connection takes place via sensor
modules and actuator modules
1
• In addition to sensors and actuators from our own product range, we also integrate products of almost all
other manufacturers.
• The sensor-actuator modules and can be used in bus or star circuit configuration
tances of up to 1000 meters (optionally longer).
•
Measurement transfer and communication takes place via Ethernet, Internet, cellular radio
phone line (ISDN, analogue)
•
In mobile use it is possible to connect the BlueBox with a GPS receiver for a continuous position determi-
nation.
1 It is possible to connect multiple sensors/actuators to a sensor module.
2 A star circuit can only be used with a repeater (see 5 Connection of the CAN-bus repeater).
optional
3
GO Systemelektronik GmbH
(output modules).
1
3 , EMC or Modbus (RS-232 / RS-485), current outputs (4 – 20 mA).
Faluner Weg 1 24109 Kiel
www.go-sys.de
Germany Tel.: +49 431 58080-0
info@go-sys.de
decentralized over dis-
2
3 (UMTS), tele-
Page 7 / 99
Fax: -58080-11