Table of Contents
Advertisement
GREEN CLASS METER
Standard Config. on top; ST Config. on bottom
Display Board
The display board interconnects to the main power board via
a flex ribbon cable and the board mounts on the inside of the
housing door. The display board LCD readout indicates the
cumulative KWH, real-time kW load, total cost, cost per hour,
total CO2 emissions and projected hourly CO2 emissions.
Additionally, errors associates with the Green Class meter,
such as low battery conditions or sensor error conditions are
displayed.
SAFETY LABEL DEFINITIONS
AND INFORMATION
The Class 200 meter may contain one or more of the follow-
ing labels. Operator(s) should familiarize themselves with the
meaning of each label to minimize risk.
The presence of this label is a cautionary
indicator identifying a danger risk. The manual
should be consulted prior to proceeding.
The presence of this label indicates an
electrical shock hazard exists in the location
or area where the label is placed. Prior
to proceeding, the MAINS power must be
disconnected and the manual consulted for
safety information.
62-0340-01
PRECAUTIONARY/SAFETY
INFORMATION
CAUTION: Internal circuit card components
are extremely sensitive to electrostatic dis-
charge. Be careful not to touch internal cir-
cuitry prior to discharging any static buildup on your person.
To discharge yourself, touch a grounded metal object such as
conduit or an earth-grounded metal enclosure.
WARNING: High voltages present on main
PCB terminal block TB1. Risk of serious
injury and/or electrical shock exists. Prior
to performing any wiring operations, review all contents of the
user manual and de-energize the MAINS power switch. Only
qualified personnel should perform installation wiring. Instal-
lation wiring must comply with all local and national electrical
codes.
WARNING: Failure to ground the enclosure
creates a possible shock hazard. Do not
operate the Class 200 meter without a pro-
tective earth wire attached securely to the PE terminal screw.
After installing protective earth wiring, secure the screw tightly
(10 N-m torque.)
WARNING: NEVER open front panel of
unit while unit has MAINS power applied.
Failure to comply can increase the risk of
serious injury and/or electrical shock.
6
Advertisement
Table of Contents
