Remote Control Operation - Honeywell HEN04112 User Manual

Remote Control Operation

It is strongly recommended to use a mouse to operate the NVR. However, you can also use the
supplied IR remote control. The following table describes basic remote control operations.
Figure 1-5 Remote Control Functions:
Button
1 Power
2 Add (Address)
3 Forward
4 Slow Play
5 Next Record
6 Previous Record
7 Play/Pause
8 Reverse/Pause
9 Esc
10 Rec
11 Direction Keys
12 Enter
13 Mult
14 Fn
15 Alphanumeric
Keys
Action
Turn the NVR on/off.
Enter the number of the device that you want to control.
Increase the forward playback speed.
Decrease the forward playback speed.
Select the next video for playback.
Select the previous video for playback.
Pause/resume forward playback.
In the live view mode, enter the video search mode.
Pause/resume reverse playback.
Return to the previous menu or cancel the current operation.
Manually start/stop recording.
While in the recording interface, use the direction buttons to
select the recording channel. Press and hold the record
button to enter the manual recording interface.
Use the left/right keys to switch the currently activated
control.
While in playback mode, use the up/down buttons to
change the playback channel.
Go to the default. Go to the menu.
Switch between the multi-channel view and the
single-channel view.
In the single-monitor mode, use the popup assistant
function, control PTZ cameras or adjust video color.
In PTZ control mode, switch the PTZ control menu.
In text mode, press and hold the button to delete the last
character.
Enter passwords or switch channels. Press Shift to switch
the input method.
Introduction | 33
800-21090V2 - A - 03/2016