Figure 88. Riser assembly removal
Step 3.
Slide the serial port module out of the riser assembly.
Figure 89. Serial port module removal
After removing the serial port module:
1. Install a new serial port module, a PCIe adapter, or a PCIe slot bracket to cover the place.
2. If you are instructed to return the old serial port module, follow all packaging instructions and use any
packaging materials that are provided.
Install the serial port module
Use this information to install the serial port module.
Before installing the serial port module, touch the static-protective package that contains the new serial port
module to any unpainted surface out of the server. Then, take the new serial port module out of the package
and place it on a static-protective surface.
98
ThinkSystem SR630 Maintenance Manual