Scan Screen - Icom IC-905 Advanced Manual

7
SCANS

SCAN screen

Display the SCAN screen�
» SCAN
Key
Starts or cancels a Programmed
Touch
scan�
PROG
Touch for Displays the SCAN SELECT
1 second screen�
Touch Starts or cancels a Memory scan�
MEMO
Touch for Displays the SCAN SELECT
1 second screen�
Starts or cancels a ∂F scan�
∂F
While Programmed scanning, touch to switch
to the Fine Programmed scan�
While ∂F scanning, touch to switch to the
FINE
Fine ∂F scan�
L In the Memory mode, this key is displayed
when a ∂F scan is started�
Selects a Memory channel (except
C1 and C2) to set as a Select
Touch
Memory channel�
SELECT
Touch for Displays the SELECT ALL CLEAR
1 second screen�
Selects the Select scan number for the
SEL No� Select Memory scan�
• "★1," "★2," "★3," or "★1,2,3"
Selects a ∂F span�
∂F SPAN • ±5�0 kHz, ±10 kHz, ±20 kHz, ±50 kHz, ±100
kHz, ±500 kHz, or ±1 MHz
SET Displays the SCAN SET screen�
Sets the operating frequency to
Touch for
RECALL the frequency displayed on this
1 second
key�
VFO mode
Memory mode
Action
• "★1," "★2," "★3," or "(no icon)"
� Push to display the SCAN SELECT screen�
L If you push
canceled�
� Hold down
previously selected scan�
7-3
while scanning, the scan is
for 1 second to start the