Temporary Skip Function - Icom IC-905 Advanced Manual

7
SCANS

Temporary Skip function

This function temporarily skips unwanted frequencies
(or memory channels) during a scan for the set
period of time or condition, without changing the Skip
Channel setting�
L You can also use this function during a DR scan�
(p� 11-4)
1� Start a scan�
• When a signal is detected, the scan pauses�
2� Push �
3� Touch "Temporary Skip Set�"
• Scan resumes�
TIP:
• Up to 20 Temporary Skip frequencies or Memory
channels can be set� When the 21st frequency or
Memory channel is set, the oldest setting is
automatically deleted�
• The Temporary Skip function is canceled when the
Temporary Skip Timer (Default: 5 min) has passed, or
when touching "Temporary Skip Cancel" in the QUICK
MENU screen�
7-10