Scan Screen - Icom IC-9700 Advanced Manual

5. SCANS

SCAN screen

To display the SCAN screen, push
touch [SCAN].
V/M
Push
Key
Starts or cancels the Programmed
Touch
scan.
PROG
Touch Displays the SCAN SELECT
1 second screen.
Touch Starts or cancels the Memory scan.
MEMO
Touch Displays the SCAN SELECT
1 second screen.
Starts or cancels the ∂F scan
∂F
While Programmed scanning, touch to switch
to the Fine Programmed scan.
While ∂F scanning, touch to switch to the
FINE
Fine ∂F scan.
L In the Memory mode, this key is displayed
when a ∂F scan is started.
Selects a Memory channel (except
1A/1B ~ 3A/3B, C1 and C2) to set
Touch as a Select Memory channel.
"1," "2," "3," and "(no icon)"
SELECT
are alternately displayed.
Touch Displays the SELECT ALL CLEAR
1 second screen.
Selects the Select scan number for the Select
Memory scan.
SEL No.
Each time you touch [SEL No.], "1," "2,"
"3," and "1,2,3" are alternately displayed.
Touch to select the ∂F span between
∂F SPAN ±5.0 kHz, ±10 kHz, ±20 kHz, ±50 kHz,
±100 kHz, ±500 kHz, and ±1 MHz.
SET Displays the SCAN SET screen.
, and then
MENU
VFO mode
.
Memory mode
Action
5-2